UNITED 11 Floor Tiles Adhesive

UNITED-11 is a grey cement based polymer modified quick set tile adhesive. It gives excellent bond on cementitious surfaces like concrete and plaster, this adhesive forms a waterproof barrier between two surfaces and has excellent 'grab' properties. Ideal for use in green building

UNITED-11 – Polymer Adhesive For Ceramics Tiles On Floors

UNITED-11 is a grey cement-based, polymer-modified quick set tile adhesive designed for superior bonding on cementitious surfaces like concrete and plaster. This advanced adhesive creates a waterproof barrier between surfaces and provides exceptional grab properties, ensuring long-lasting durability. Ideal for green building projects, UNITED-11 is perfect for interior tile installations in floors, kitchens, bathrooms, lobbies, meeting rooms, and more.

Key Advantages of UNITED-11 Tile Adhesive:

✅ Self-Curing Adhesive – Eliminates the need for additional curing
✅ Easy to Use – Smooth application for hassle-free tiling
✅ Flexible & Impact-Resistant – Withstands shocks and movement
✅ Fast & Economical – Quick setting formula saves time and labor costs
✅ High Bond Strength – Ensures long-lasting tile adhesion

Specifications:

✔ Color: Grey/White
✔ Pack Size: 20Kg Bag

For strong, waterproof, and reliable tile installations, choose UNITED-11 tile adhesive—your trusted solution for durable construction. Order now!

Polymer based adhesive for fixing ceramic tiles and small format natural stone on dry areas of interior floors & interior wall up to a height of 3 Mtrs.

FEATURES / BENEFITS

Single component, just add water
Interior applicaons, polymer based
Economical & Easy to use
Bonds to various substrates
Complies with EN / ISO with a C1T classificaon
Exceeds IS 15477:2019 - Type 1T Adhesive standards.

SUBSTRATES

Concrete
Concrete Masonry
Cement Mortar Beds
Cement Plaster
Brick Masonry
Surface to be cleaned and roughened before installation of les or stones.

Applications:

✅ Designed especially for dry areas of interior floor and interior wall installaons of all types of ceramic - le and small form at natural stones over concrete and on a variety of cement-based substrates. Can be used upto maximum 12mm bed thickness.

Applicable Standards:

ANSI A118.1-1999; EN 12004 & ISO 13007; IS15477:2019

ANSI Data

Property : Test method	Requirement	Typical Values
Open Time (20 Minutes at 28 days): ANSI A118.1 Clause – 5.3	≥75 psi (0.50 Mpa)	95 psi – 100 psi (0.65 – 0.69 Mpa)
Sag: ANSI A118.1- Clause 6.0	≤0.02 Inches (0.50 mm)	0.016 – 0.018 Inches (0.40-0.45 mm)

Glazed wall tile Shear Strength

7 Days: ANSI A118.1 – Clause 7.1.2	>200psi (1.38Mpa)	200-225 psi (1.38 Mpa-1.55 Mpa)
7 Days Water immersion: ANSI A118.1- Clause 7.1.3)	>150psi (1.03Mpa)	150-175 psi (1.03 Mpa-1.20 Mpa)

Porcelain Mosaic Tile Shear Strength

1 Day: ANSI A118.1 – Clause 7.2.2	>50psi (0.34Mpa)	50 -75 psi (0.34 Mpa-0.51 Mpa)
7 Days: ANSI A118.1 – Clause 7.2.3	>150psi (1.03Mpa)	150-175 psi (1.03 Mpa-1.20 Mpa)
7 Days Water immersion: ANSI A118.1 – Clause 7.2.4	>100psi (0.69Mpa)	125-150 psi (0.86 Mpa-1.03 Mpa)
28 Days: ANSI A118.1 – Clause 7.2.5	>150psi (1.03Mpa)	150-175 psi (1.03 Mpa-1.20 Mpa)
12 Weeks: ANSI A118.1 – Clause 7.2.6	>150psi (1.03Mpa)	150-175 psi (1.03 Mpa-1.20 Mpa)

The adhesive mortar conforms to ANSI A 118.1 T

EN / ISO Data

Property : Test method	Requirement	Typical Values
Open Time: EN 1346	≥0.50 N/mm²	0.65 – 0.69 N/mm²
Slip Resistance: EN 1308	≤0.50 mm	0.40-0.45 mm

Tensile Adhesion Strength

Initial: EN 1348 – Clause 8.2	≥0.50 N/mm²	0.50 – 0.60 N/mm²
After Water Immersion : EN 1348 - Clause 8.3	≥0.50 N/mm²	0.50 – 0.60 N/mm²
Heat Ageing: EN 1348 – Clause 8.4	≥0.50 N/mm²	0.50 – 0.60 N/mm²
Freeze- Thaw: EN	≥0.50	0.50 – 0.60 N/mm²
1348 – Clause 8.5	N/mm²

The adhesive mortar conforms to EN12004 / ISO 13007 as C1T

EN / ISO Data

Property : Test method

Requirement

Typical Values

Tensile Adhesion

Dry Condition– Annex A (Clause 5.1)

Minimum 0.50 N/mm

0.60-0.70 N/mm

Shear Adhesion

Dry Condition– Annex B (Clause 5.2)

Minimum 1.00 N/mm

1.10-1.20 N/mm2

Slip Resistance

Slip Resistance – Annex E (Clause 5.5)

≤0.50 mm

0.25-0.35 mm

The Adhesive mortar conforms to IS 15477: 2019 - Type 1T Adhesive

Packaging:

20 kg bags

Color:

Grey/White

Coverage:

Approx. 20-22 sqft. 5mm bed

Coverage will vary depending on trowel notch size, type and size of tile, and substrate smoothness and evenness.

Working Properties at 70° F (21° C )

UNITED 11 Adhesive mixed with Water

Pot Life	2 Hours
Time to Heavy Traffic:	16-24 hours

Specifications subject to change without notification. Results shown are typical but reflect test procedures used. Actual field performance will depend on installation methods and site conditions.

Surface Preparation: All surfaces should be between 4 0° F(4°C) and 104° F(40°C) and structurally sound, clean and free of all dirt, oil, grease, loose peeling paint, laitance, concrete sealers or curing compounds. Check the surface to be true to plumb. All slabs must be plumb and true to within ¼”(6mm) in 10 ft(3m). Rough or uneven concrete surfaces should be made smooth.

Dry, dusty concrete slabs or masonry should be dampened and excess water swept off. Installation may be made on a damp surface. New concrete slabs shall be damp cured and 28* days old before application. *No minimum cure time for concrete slabs when thin-set Expansion joints shall be provided through the tile work from all construction or expansion joints in the substrate. Do not cover expansion joints with thin set mortar. Follow ANSI Specication AN-3.8 “Requirements for Expansion Joints” or TCA Detail EJ171 “Expansion Joints”. For tile installation over Cement Backer Board: follow TCA installation details W244. mortar is mixed with latex additive.

Mixing: Place clean, potable water into a clean mixing bowl.Add UNITED 11 powder into the mixing bowl. Use approximately 5.5 - 6L of water for 20 kg of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow adhesive to slake for 5 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel

Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to ensure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large format tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into wet, sticky adhesive and beat in using a beating block and rubber mallet to imbed tile and adjust level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive.

UNITED 11 Floor Tiles Adhesive