United P 100 Epoxy Grout Stainless

The United P-100 Epoxy Tile Adhesive from United Mortar Industries is a premium, three-component, 100% solid epoxy grout system engineered for high-performance tile installations. Designed to withstand physical abuse, chemical exposure, and moisture, it is ideal for both residential and light commercial applications.

Key Features:

✔ Stain and Dirt Proof: Ensures long-lasting cleanliness and aesthetic appeal.

✔ Low Water Absorption: Prevents shrinkage and water seepage, enhancing durability.

✔ Chemical and Acid Resistance: Suitable for environments exposed to harsh chemicals.

✔ High Strength: Provides robust support for various tile types.

✔ Color-Fast: Maintains consistent color over time.

✔ Low VOC Content: Environmentally friendly, ideal for green building projects.

Applications:

✅ The United P-100 is versatile and can be used for:

✅ Ceramic tiles

✅ Brick pavers

✅ Marble and stone installations

✅ Its robust properties make it suitable for areas that require resistance to physical stress and chemical exposure.

 Packaging:

✔ Available in 1.4 kg and 5.6 kg buckets.

Applicable Standards:

ANSI A118.3; ISO 13007 – 3 (RG) / EN 13888

ANSI Data

The grout mortar conforms to ANSI A 118.3

ISO / EN Data

The grout mortar conforms to ISO 13007 – 4 (RG) / EN 13

The mix density of UNITED P-100 grout is 1710 kg /m3.

Packaging:

United P-100 is a factory proportioned kit with Hardener (Part A), Resin (Part B), and colored filler powder (Part C).

Colour:

Choose from range of colours available in Part C filler powder. Please refer the grout colour chart for choosing the colour required.

Coverage:

Please refer the coverage chart as it depends on the tile size, joint width and depth.

Working Properties at 70° F (21° C)

Working Properties:

Chemical Resistance Charts: At 23°C

Acid Based Chemicals

PE: Prolonged Exposure; IE: Intermittent Exposure: SE: Splash Exposure; P: Poor: G: Good; VG: Very Good;

✔ Long exposure will cause colour change

Base and Salt Solutions

PE: Prolonged Exposure; IE: Intermittent Exposure: SE: Splash Exposure; P: Poor: G: Good; VG: Very Good;

✔ Long exposure will cause colour change

Household / Food Stuff Solutions

PE: Prolonged Exposure; IE: Intermittent Exposure: SE: Splash Exposure; P: Poor: G: Good; VG: Very Good;

NA: Not Applicable

Solvents & Combustible Solutions

PE: Prolonged Exposure; IE: Intermittent Exposure: SE: Splash Exposure; P: Poor: G: Good; VG: Very Good;

NA: Not Applicable

✔ Long exposure will cause colour change

Installation

Important site Checks: Notes to the specifiers:

✔ It is recommended to check the colour of the grout, if it is meeting the desired colour of the client

✔ It is recommended to do a small area with actual tile/stone at site and check for any colour ingress into the tile/stone. Many tiles / stones have high absorption which may lead to discoloration / colour marks.

✔ Plan to provide proper movement joints, peripheral joints as per EJ 171 to accommodate movements in tile/stone and use flexible grout / sealant to fill these movement joints.

✔ United P 100 is a solid epoxy grout and does not accommodate movements in tile/stone that can occur due to various reasons. Movements which occur in the tile/stone area due to non provision of movement joints will lead to cracks / breakage of grout joints / tile/ stone.

✔ Keep the working area covered and protected from Sun light while application of United P-100, stain free epoxy grout, is applied in open areas like swimming pools etc. Keep the cover for 7 days and till the filling of pools with water after the completion of grouting with United P-100, stain free epoxy grout.

Surface Preparation:

Before starting to grout, remove debris in grout joints and lightly sponge the tile surface to remove dust and dirt. Do not clean tiles with acid cleaners. In case acid cleaners were used to clean the tiles, ensure to wash the area with plenty of water before commencing grouting. Substrate temperature must between 60°F (16°C) and 90°F (32°C).

Mixing

Empty entire contents of United P-100 Stain free Grout Part “A” and Part “B” container into a clean mixing pail. Mix with a margin trowel or a slow speed drill mixer until liquids are completely blended. Add at least ¾ of United P-100 Part “C” Filler Powder and mix to a uniform consistency. Add the remaining filler powder and mix to achieve a stiff mix to work into the joints.

Designed especially for interior and covered exterior floor and wall joints of all types of ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, metal tiles, precast terrazzo, engineered stone floors and natural stones. Recommended for Institutional and commercial kitchens, Cafeterias, residential facilities, Rest rooms, Schools and wet areas like swimming pools, sauna, water bodies and wash rooms.